|
Parts and Labor Pricing
Here you will find some prices of services and parts. This is not the only services I offer nor the only parts I carry but is a sample of what I can do. I do not do body work. I will do any mechanical restoration including component painting and powder coating and ceramic coating. My shop rate is $50 hr. I use the 1969 Motors flat rate manual for time guides and for what is not in the book I have a few of my own flat rates. Anything else is time and material. Keep in mind that this is a full time thing for me again but you still will not get it yesterday. --------------------------------------------------------------------------------------- I accept Check, MO, or Pay Pal |
| Description | Price |
|---|---|
| Engine R&R | $235 |
| Turbo Engine R&R | $295 |
| Add for Trans and Diff Removal | $75 |
| Standard Engine Rebuild, Call for Parts or info | $3,900 |
| Race Prep Block, Includes Enlarge Main Oil Galleries | $188 |
| Bore Cylinders | $40ea |
| Valve Grind, 3 Angle | $82ea. head |
| Valve Guide Liner, Installed | $30ea. |
| Valve Guide, Installed, Bronze Extra | $35ea. |
| Valve Seat, Installed | $35ea. |
| Weld Head for Valve Seat Repair | $30ea. |
| Titanium Valve Retainers | Call for Pricing |
| Valve Springs, 100# seat pressure | $3.50ea. |
| Intake Valves | $6.50 |
| SS Exhaust Valves | $15ea. |
| Lifters, These are not saucer plates! | $4.50ea. |
| High Perf. Lifters, as used in my own race car | $7.95ea |
| Mill Cylinder Heads, cut fin area only | $75ea. |
| Resurface Cylinder Gasket Area | $50 ea. head |
| 61-65 4spd Trans Rebuild, Includes small parts and gaskets | $425 |
| 66-69 Saginaw 4spd Rebuild, Includes small parts and gaskets | $375 |
| Yenko Close Ratio Trans, Core Needed | $1,260 |
| Std Differential Rebuild, Auto slightly higher, Includes Bearings, Seals, and Gaskets | $375 |
| AMSOIL Gear Lube, The Correct GL-4 | Check for Pricing |
| Clutch Disc, Plus Core, Welded Center ONLY | $69 + core |
| Pressure Plate, STD, Plus Core | $135 + core |
| Bolt and Balance Flywheel | $105 |
| Engine Sheet Metal Bolt Kits | $15 |
| Grade 8 Bolts | Call for Pricing |
| 65-69 Rebuilt Rear Lower Control Arms | $55ea. |
| Heater Motor, HV | $39 |